Skyworks Solutions, Inc.: RF Power Amplifier Module: SKY77733-12

RF Power Amplifier Module, Amplifiers, Passives, Control Components, Integrated Modules and Chipsets, Test and Measurement, Discrete Semiconductor, Design Kit, RFMW

SKY77733-12
Power Amplifier Module, 777 - 798 MHz, LTE, 28 dBm, 3x3 mm
Manufacturer: Skyworks Solutions, Inc.
Status: Standard
Data Sheet: SKY77733-12 Data Sheet
RoHS Compliance: Skyworks Solutions, Inc., SKY77733-12, RF Power Amplifier Module, Power Amplifier Module, 777 - 798 MHz, LTE, 28 dBm, 3x3 mm (Rohs Compliant), RFMW Ltd (RFMW) Yes
Specifications
Frequency Min:
0.777 GHz
Frequency Max:
0.798 GHz
V d:
3.4 V
atPout (SCL):
28 dBm
Application:
LTE
Package:
3x3 mm
Also Available
Part FunctionPart NumberDescription
Evaluation Board EN21-D395-001 REV A VARIANT 1 Skyworks Solutions, Inc. Evaluation Board for SKY77737-11 LTE PA Module 698-716 MHz
The SKY77733 Power Amplifier Module (PAM) is a fully matched, surface mount module developed for LTE applications. This small and efficient module packs full coverage of LTE Bands 13/14 into a single compact package. The SKY77733 meets the stringent spectral linearity requirements of LTE modulation with QPSK /16QAM modulations from 5 MHz to 10 MHz bandwidth and full or partial resource block allocations with high power added efficiency. The single Gallium Arsenide (GaAs) Microwave Monolithic Integrated Circuit (MMIC) contains all active circuitry in the module, including the PA, input, and interstage matching. Output match is realized off-chip within the module package to optimize efficiency and power performance into a 50 Q load. The SKY77733 is manufactured with Skyworks' BiFET process which provides for all positive voltage DC supply operation while maintaining high efficiency and good linearity. Primary bias is supplied via the VCC1 and VCC2 pads directly from battery output in the 3.0 to 4.2 volt range. Power-down is accomplished by setting a logic low level on the VEN pad. No external supply side switch is needed as typical "off" leakage is a few microamperes with full primary voltage supplied from the battery, The VMODEO and VMODE1 pads are used to switch between high, medium and low power modes to reduce current consumption and gain in the back-off conditions.
Pricing
Qty 
 
Availability
On Order: 100
QuantityAvailable
+1001 Day
Call 1-877-367-7369 for Availability or Get a Quote
Qty