Skyworks Solutions, Inc.: Front-End Module: SKY77570-12

Front-End Module, Amplifiers, Passives, Control Components, Integrated Modules and Chipsets, Test and Measurement, Discrete Semiconductor, Design Kit, RFMW

SKY77570-12
FEM,  Quad-Band GSM/GPRS/EDGE 6-Band Antenna Switch Support
Manufacturer: Skyworks Solutions, Inc.
Status: Standard
Data Sheet: SKY77570-12 Data Sheet
RoHS Compliance: Skyworks Solutions, Inc., SKY77570-12, Front-End Module, FEM,  Quad-Band GSM/GPRS/EDGE 6-Band Antenna Switch Support (Rohs Compliant), RFMW Ltd (RFMW) Yes
Specifications
Sub Type:
Cellular
RF Frequency:
850 to 1900 MHz
SKY77570 is a transmit and receive Front End Module (FEM) designed in a very low profile (0.9 mm), compact form factor for quad-band cellular handsets comprising GSM850/900, DCS1800, and PCS1900 operation — a complete transmit VCO-to-Antenna and Antenna-to-receive SAW filter solution. The FEM also supports Class 12 General Packet Radio Service (GPRS) multi-slot operation and EDGE Linear Modulation. WCDMA switch-through support is provided by six dedicated high-linearity ports. The module consists of a GSM850/900 PA and DCS1800/PCS1900 PA block, impedance-matching circuitry for 50 Q input and output impedances, Tx harmonic filtering, high linearity-low insertion loss switches, and a Multi-Function power amplifier Control (MFC) block.The internal MFC function and interface circuitry is provided by a BiCMOS 1C.. Fabricated in InGaP/GaAs, the Heterojunction Bipolar Transistor (HBT) PA blocks support the GSM850/900 bands and DCS1800/PCS1900 bands. Both PA blocks share common power supply pads to distribute current. The output of the PA block and the outputs to the eight receive pads connect to the antenna pad through a highly linear antenna switch. The WCDMA and Rx ports feature a near 0 volts DC offset level, which eliminates any need for external blocking capacitors. The InGaP/GaAs die, switch die, Silicon (Si) controller die, and passive components are mounted on a multi-layer laminate substrate and the entire assembly is encapsulated with plastic overmold. The SKY77570 RF I/O ports are internally matched to a 50 Q load to reduce the number of external components for a quad-band design. Extremely low leakage current of the FEM maximizes handset standby time. Band selection and control of transmit and receive RF signal flows are performed via six external control pads (see Figure 1). Mode of operation, Tx, Rx, Band (GSM850, GSM900, DCS, PCS, and UMTS) are controlled through the 9 logic inputs LB_EN, HB_EN, MODEO, MODE1, SWO, SW1, SW2, SW3, and SPOT.
Pricing
Qty 
 
Availability
On Order: 20999
QuantityAvailable
+209992 Weeks
Call 1-877-367-7369 for Availability or Get a Quote
Qty