Qorvo: RF Converter: RF2051

RF Converter, Amplifiers, Passives, Control Components, Signal Generation, Integrated Modules and Chipsets, Test and Measurement, Discrete Semiconductor, Design Kit, RFMW

RF Frequency Converter, 30 - 2500 MHz, Intergrated PLL/VCO, RF Mixer
Manufacturer: Qorvo
Status: Standard
Data Sheet: RF2051 Data Sheet
RoHS Compliance: Qorvo, RF2051, RF Converter, RF Frequency Converter, 30 - 2500 MHz, Intergrated PLL/VCO, RF Mixer (Rohs Compliant), RFMW Ltd (RFMW) Yes
Also Available
Part FunctionPart NumberDescription
Complementary Product RFXF6553 MiniRF, Inc. Transformer, Balun, Line, 1:4, 10 to 1900 MHz, 50 Ohm Nom. Impedance
Complementary Product RFXF8553 MiniRF, Inc. Transformer, Balun, Line, 1:4, 500 to 2500 MHz, 50 Ohm Nom. Impedance
Complementary Product RFXF9503 MiniRF, Inc. Transformer, Balun, Line, 1:1, 3 to 3000 MHz, 50 Ohm Nom. Impedance
The RF2051 is a very wideband RF frequency conversion chip with integrated local oscillator (LO) generation and a pair of RF mixers. The RF synthesizer includes an integrated fractional-N phase locked loop with voltage controlled oscillators (VCOs) and dividers to produce a low-phase noise LO signal with a very fine frequency resolution. The LO output drives the built-in RF mixers which convert the signal into the required frequency band. The bias current can be programmed to optimize the supply current/performance trade-off. The LO generation blocks have been designed to continuously cover the frequency range from 300MHz to 2400MHz. The RF mixers are very broad band and operate from 100MHz to 2500MHz at the RF ports of the device. An external crystal of between 10MHz and 52MHz or an external reference source of between 10MHz and 104MHz can be used with the RF2051 to accommodate a variety of reference frequency options. The device is programmed using a true three-wire serial interface. The RF2051 is designed for 2.7V to 3.6V operation for compatibility with portable battery powered devices. It is available in a plastic 32-pin 5mmx5mm QFN package.

  • 30 MHz to 2.5 GHz Frequency Range
  • Fractional-N Synthesizer
  • Very Fine Frequency Resolution 1.5 Hz for 26 MHz Reference
  • Low Phase Noise VCO
  • On-Chip Crystal-Sustaining Circuit With Programmable Loading Capacitors
  • Two High-Linearity RF Mixers
  • Integrated LO Buffers
  • Mixer Input IP3 +18 dBm
  • Mixer Bias Adjustable for Low Power Operation
  • Full Duplex Mode
  • 2.7 V to 3.6 V Power Supply
  • Low Current Consumption 55 mA to 75 mA at 3 V
  • 3-Wire Serial Interface
  • Pricing
    Available: 1987
    +25002 Weeks
    Call 1-877-367-7369 for Availability or Get a Quote