Qorvo: RF Switch: RF1604

RF Switch, Amplifiers, Passives, Control Components, Signal Generation, Integrated Modules and Chipsets, Test and Measurement, Discrete Semiconductor, Design Kit, RFMW

RF Switch, SP4T, LF to 2.5GHz, 0.4dB IL, 40dB isolation, 2.5x2.5mm QFN
Manufacturer: Qorvo
Status: No new designs
Data Sheet: RF1604 Data Sheet
RoHS Compliance: No
Manufacturer: Qorvo
Status: No new designs
Data Sheet: RF1604 Data Sheet
RoHS Compliance: No
Frequency Range Min:
100 MHz
Frequency Range Max:
2500 MHz
Insertion Loss Min:
0.4 dB
Insertion Loss Max:
0.4 dB
Isolation Max:
40 dB
Power Rating:
36 dBm
Also Available
Part FunctionPart NumberDescription
Replacement RF1614A Qorvo RF Switch, SP4T, 0.7 to 2.7 GHz, 0.35 dB to 0.54 dB IL, 40 dB Iso, 1.8 x 1.8 mm, 12 Pin Module
The RF1604 is a single-pole four-throw (SP4T) switch designed for general purpose switching applications which require very low insertion loss and high power handling capability with minimal DC power consumption. The excellent linearity performance achieved by the RF1604 make it ideal for use in multi-mode GSM/EDGE/WCDMA, LTE, and cellular infrastructure applications. The RF1604 offers very high isolation between the RF ports, providing greater RF separation between the transmit and receive paths, which is critical in full-duplex systems. Additionally, RF1604 includes integrated decoding logic, allowing just two control lines needed for switch control. The RF1604 is packaged in a very compact 2.5mm x 2.5mm, 12-pin, leadless QFN package.

  • 2kV HBM ESD Protection on All Ports
  • Low Frequency to > 2.7GHz Operation
  • Low Insertion Loss: 0.4dB at 1GHz
  • Very High Isolation: 40dB at 1GHz
  • Compatible With Low Voltage Logic (VHIGH Min = 1.3V)
  • High Linearity: IIP2 > 120dBm
  • No External DC Blocking Capacitors Required on RF Paths Unless DC is applied Externally
  • Qty 
    Available: 2070
    Call 1-877-367-7369 for Availability or Get a Quote