Qorvo: RF Mixer: ML483-G

RF Mixer, Amplifiers, Passives, Control Components, Signal Generation, Integrated Modules and Chipsets, Test and Measurement, Discrete Semiconductor, Design Kit, RFMW

Mixer, Passive, w/L.O. Amp, 700 to 1000 MHz, -8.6 dB Conv. Gain, MSOP-7
Manufacturer: Qorvo
Status: Standard
Data Sheet: ML483-G Data Sheet
RoHS Compliance: Qorvo, ML483-G, RF Mixer, Mixer, Passive, w/L.O. Amp, 700 to 1000 MHz, -8.6 dB Conv. Gain, MSOP-7 (Rohs Compliant), RFMW Ltd (RFMW) Yes
RF Frequency:
700 to 1000 MHz
Operating LO Frequency Range:
540 to 1300 MHz
IF Frequency:
70 to 300 MHz
LO Input Power:
0 dBm
36 dBm
Supply Voltage:
5 V
Isolation RF-IF:
16 dB
Also Available
Part FunctionPart NumberDescription
Evaluation Board ML483-PCB Qorvo Evaluation board for ML483
The TriQuint ML483-G high linearity converter combines a passive GaAs FET mixer with an integrated LO driver in an ultra-small lead-free / green / RoHS-compliant MSOP-8 package. The double-balanced integrated IC is able to operate across a 0.7 - 1.0 GHz frequency range to achieve +36 dBm Input IP3 while drawing a very low 50 mA current. The ML483-G can be used as an upconverter or downconverter in a low-side or high-side LO configuration. A LO buffer amplifier is integrated on the chip to allow for operation directly from a synthesizer requiring only 0 dBm of drive level. The dual-stage LO driver provides a stable input power level into the mixer to allow for consistent performance over a wide range of LO power levels. The converter requires no external baluns and supports a wide range of IF frequencies. Typical applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in 2.5G and 3G mobile infrastructure. Due to the wide frequency range of operation, the converter can also be used for ISM and fixed wireless applications. The ML483-G is footprint and pin compatible with TriQuint's 1.6 - 3.2 GHz ML485-G mixer for high band applications.

  • High dynamic range mixer with integrated LO driver
  • +36 dBm Input IP3
  • 9 dB conversion loss
  • RF: 700 to 1000 MHz
  • LO: 540 to 1300 MHz
  • IF: 70 to 300 MHz
  • +5 V supply @ 50 mA
  • 0 dBm drive level
  • RoHS compliant
  • MSOP-8 (14 mm²) package
  • Pricing
    1 - 24 $6.45
    25 - 99 $4.94
    100 - 249 $3.86
    250 - 499 $3.20
    500 - 999 $2.87
    Available: 1920
    Call 1-877-367-7369 for Availability or Get a Quote