Aviacomm

Integrated Modules and Chipsets, Design Kit Products From RFMW


Aviacomm

Learn about Aviacomm’s latest RF transceivers here!

Aviacomm ARF3010 Transceiver Aviacomm ARF2010 Transceiver Aviacomm ARF1020 Transceiver
ARF3010 ARF2010 ARF1020

ARF3010

The ARF3010 is a wideband, low power, direct conversion RF transceiver designed for 3G/4G LTE cellular, TVWS, and other wireless protocols. The ARF3010 can be rapidly configured to operate on any frequency band between 50MHz and 2.85GHz, and for different bandwidth signals, without restrictions of band-limited ports. This enables more efficient and scalable RF front-end designs.

Feature Benefit
Direct Conversion Reduced parts count and smaller footprint enables the ARF3010 to meet challenging application requirements
Broadband 50 MHz to 2.8 GHz coverage Single chip addresses multiple frequency bands, from TVWS through all 3GPP bands, without restrictions of band-limited ports, enabling more efficient and scalable RF front-end designs
Flexible channel sizes from 0.5MHz to 40MHz Programmable baseband filters meet the channel bandwidth requirements of multiple wireless standards
1 TX × 2 RX configuration MIMO support for improved downlink through-put and spatial diversity reception
FDD and TDD support Supports both duplexing methods - the currently dominant cellular FDD protocol and the emerging TDD protocol
TVWS compliant Meets TVWS stringent requirements in a low cost IC enabling TVWS market and applications
7 x 7 mm QFN Package Small space-saving package efficient for compact circuit boards

ARF3010 Product Bulletin

ARF3010 EVB – Evaluation Board

The ARF3010 Evaluation Board is a hardware platform designed to enable convenient evaluation of the ARF3010 RF transceiver integrated circuit.

ARF3010 EVB Product Bulletin


ARF2010

The ARF2010 CMOS Transceiver IC is a highly integrated RF/IF sub-system that can be used to simplify and cost-reduce discrete RF designs. It provides the features and high-linearity required for high-performance wireless systems, such as cellular infrastructure, small cells, repeaters, and M2M applications. Configured as one transmitter and one receiver, it operates from 50 MHz to 2,800 MHz on its RF ports and offers wide bandwidth on its IF ports.

Feature Benefit
Broadband 50MHz to 2.8GHz coverage Single chip offers continuous coverage over the entire UHF through 2.8GHz spectrum range
Broadband IF frequency response RXIF up to 100MHz & TXIF up to 200MHz bandwidth enables wide bandwidth IF channels
1 TX & 1 RX path with gain programmable gain control Enables high system integration for BOM savings
TX PA driver with up to 0dBm linear output power Minimizes gain required by system PA
7 x 7 mm QFN Package Small space-saving package efficient for compact circuit boards

ARF2010 Product Bulletin

ARF2010 EVB – Evaluation Board

The ARF2010 Evaluation Board is a hardware platform designed to enable convenient evaluation of the ARF2010 RF transceiver integrated circuit.

ARF2010 EVB Product Bulletin


ARF1020

The ARF1020 is a direct conversion RF transceiver designed for 3G/4G LTE cellular or similar wireless applications. It is packaged in a 14.8 sq. mm wafer level chip scale package (WLCSP), making it the world’s smallest wideband 4G RF transceiver. The small form factor enables it to be used for NGFF (next generation form factor) or other miniature embedded module formats. The ARF1020 can operate on any frequency band between 300 MHz and 2,800 MHz, without restrictions of band-limited ports, enabling more efficient and scalable RF front-end designs.

Feature Benefit
Direct Conversion Reduced parts count and smaller footprint enables the ARF1020 to meet challenging application requirements
Broadband 300 MHz to 2.8 GHz coverage Single chip addresses multiple frequency bands, from sub GHz through all 3GPP bands, without restrictions of band-limited ports, enabling more efficient and scalable RF front-end designs
Flexible channel sizes from 0.5MHz to 40MHz Programmable baseband filters meet the channel bandwidth requirements of multiple wireless standards
1 TX × 2 RX configuration MIMO support for improved downlink through-put and spatial diversity reception
FDD and TDD support Supports both duplexing methods - the currently dominant cellular FDD protocol and the emerging TDD protocol
3.7 x 4 mm WLCSP Package Small space-saving package possible for miniature embedded application requirements

ARF1020 Product Bulletin

ARF1020 EVB – Evaluation Board

The ARF1020 Evaluation Board is a hardware platform designed to enable convenient evaluation of the ARF1020 RF transceiver integrated circuit.

ARF1020 EVB Product Bulletin